How to enter cmos setup windows 7

Look for a notification that tells you which key or combination of keys to press to enter BIOS settings. If you miss this notification the first time, just simply restart your computer again. If you are not sure, consult the manufacturer of your computer for the answer. On Windows 10 On Windows 8 and Windows 10, the fast startup feature is adopted, therefore, you cannot press the function key to enter BIOS configuration when booting the system.

Here is how you can do it. Then click the power button. How to Fix Battle. Here is how you can do it. Then click the power button. Your computer may be configured to show your computer's logo instead of important BIOS messages. Press Esc or Tab while the logo is showing to remove it. Some computers start too quickly to see the BIOS access message. Press any key to "unpause" your computer and continue booting.

If you're having problems pressing that pause button in time, turn on your computer with your keyboard unplugged. Some older computers may also display a flashing block to indicate when to press the F1 or F2 keys. If you're unsure of what key to press, as the computer boots try pressing and holding one or more keys on the keyboard to cause a stuck key error.

Once you get this error, the option to continue or enter setup should appear. Documentation for the motherboard may also be on the manufacturer's website. Once you have successfully entered the CMOS setup, a screen similar to the example below appears.

Your CMOS setup may look different, depending on the manufacturer, but should still share a lot of the same options and information. You may use the arrow keys and the Enter to select categories and change their values. Some manufacturers may have you press the Page up and Page down keys to change the values. If you're trying to change the clock, speed, or other settings and don't have the option available, it's because the motherboard doesn't support it. If you believe it should be supported, you may need a BIOS update.

If changes you made appear to revert to default settings or the date and time setting in the BIOS keeps falling behind, you may need to replace the CMOS battery.

If any changes are made, you need to save those changes, which is usually done by pressing the F10 key on the keyboard. If F10 doesn't work, look at the bottom or top of the screen for the key that's used to save the settings.