Xyz stages manual

Thank you for your cooperation. Show products with stock items. Configure Now Ships as soon as 5 Days. Configure Now Ships as soon as Quote. Configure Now Ships as soon as 4 Days.

Configure Now Ships as soon as 12 Days. Configure Now Ships as soon as 72 Days. Configure Clear All. Drawing Clear. For more information please see our Privacy Policy. Precision crossed roller guide provides high accuracy and parallelism. The manual xyz stage uses crossed roller guide which ensures the high precision and smooth of motion. The main material of the manual xyz translation stage is aluminum alloy, so the weight of manual xyz stage is very light and the stage can be easily built in other equipment.

Our xyz translation stages use high quality micrometer head with 0. It provides 0. We have three drive positions for customer choice left hand, right hand and center. Note: We will separately pack xy axis stage and z axis stage for safety during shipment. The screws and hexagon wrench will be provided along with the items for customer to assemble them together. Auto CAD. STEP :. The slotted holes in the angle bracket should be lined up with the threaded holes in the y- axis carriage and attached with the included M6 screws.

Be sure to position the angle bracket with enough room for the z-axis stage to attach without contacting one of the other stages. To attach the z-axis, sit the z-stage onto the y-stage carriage, then line up the clearance holes on the base of the stage with the threaded holes on the angle bracket and bolt them together.

This shows a typical XYZ orientation. The z- axis stage can also be rotated 90 deg to overhang the y-axis stage. Note that the following procedures are intended only as a guide to help you align your multi-axis system. The specifics of aligning your stages will vary according to your setup. A machinist's square is required for these procedures. Then, use a machinist's square to align the lower axis stage with an edge of the breadboard and tighten the mounting screws.

Next, loosely attach the next axis and align the bases of these two stages using the machinist's square as shown. When the stages are aligned, tighten the mounting screws. Use the machinist's square as a straight edge to align the Z-axis stage with the carriage of the stage it is attached to. It may help to have a small amount of tension on the mounting screws, so the z-axis stage can be moved, but with a little resistance.

When it is aligned, tighten the screws. The transmit time will vary by destination. You can get the shipping cost on the cart page after the items are added in. Ask a Question. Prices Reduction Notice Arrival Notice. Product Description. Features: High load capacity. Description: The manual xyz stage uses crossed roller guide which ensures the high precision and smooth of motion.

There are currently no product reviews. NOTE: Reviews require prior approval before they will be displayed. Wire Transfer We can also accept payment by wire transfer.